StarTech.com
Ikke kategoriseret
KEYBOARD-TRAY-CLAMP1
StarTech.com KEYBOARD-TRAY-CLAMP1 Brugsanvisning
Her er StarTech.com KEYBOARD-TRAY-CLAMP1 (Ikke kategoriseret) brugervejledning. 2 sider på sprog Engelsk med en vægt på 0.2 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support
Manual Revision: January 28, 2022 3:27 PM
Product Diagram (KEYBOARD-TRAY-CLAMP1)
Component Function
1Desk Clamp, Left • Attach the to the Keyboard Tray Desk
2Keyboard Tray • Place a keyboard and a mouse on the Keyboard Tray
3Desk Clamp, Right • Attach the to the Keyboard Tray Desk
4Clamp Knob • Turn by hand to secure the to the Clamp Desk
5Height Adjustment L
Bracket
• Adjust the height between the and theDesk
Keyboard Tray
• Attach the to the Keyboard Tray Desk Clamp
Package Contents
• Keyboard Tray x 1
• Height Adjustment Screws x 5
• Tray Mounting Screws x 5
• Height Adjustments L Brackets x 2
• Desk Clamp Left x 1
• Desk Clamp Right x 1
• Quick-star Guide x1
Desk Clamp Keyboard Tray
Requirements
For the latest manuals, product information, technical specications, and declarations of
conformance, please visit: www.startech.com/KEYBOARD-TRAY-CLAMP1
• Phillips Head Screwdriver
Installation
WARNING!
Do not exceed the weight capacity of this product. Overloading this product might
result in injury or property damage. This product can support the following weight: up
to . 11.8 kg (26 lbs)
Ensure the mounted is properly secured to the before use.Keyboard Tray Desk
Attach the Desk Clamp to the Height Adjustment L
Brackets
1. Determine the desired height between the and the 100, Desk Keyboard Tray:
120, or 140 mm (3.9, 4.7, or 5.5 in). Each row of holes on the Height Adjustment
L Bracket are spaced 20 mm apart. The row of holes, located closest to the bend
of the provides the minimum height adjustment Height Adjustment L Brackets,
setting of 100 mm (3.9 in).
2. Secure the to the using the Height Adjustment L Bracket Desk Clamps Height
Adjustment Screws Phillips Head (x2 shorter screws) and tighten using a
Screwdriver Desk Clamp Assembly to complete the rst (Figure 1).
3. Repeat steps and to install the second 2 3 Desk Clamp Assembly
Attach the Desk Clamp Assemblies to the Keyboard Tray
1. Flip the upside down and align the mounting holes located on Keyboard Tray
3
12
5
4
Figure 1
Problemløsning StarTech.com KEYBOARD-TRAY-CLAMP1
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Bredde: | 310 mm |
| Dybde: | 700 mm |
| Højde: | 32 mm |
| Brugervejledning: | Ja |
| Produktfarve: | Sort |
| Pakkevægt: | 3200 g |
| Pakkedybde: | 340 mm |
| Pakkebredde: | 830 mm |
| Pakkehøjde: | 62 mm |
| Materiale: | Stål |
| Hovedkassen højde (udvendigt): | 370 mm |
| Hovedkassens længde (udvendigt): | 280 mm |
| Hovedkassens bredde (udvendigt): | 840 mm |
| Form: | Rektangulær |
| Produkter pr. hovedkasse (udvendigt): | 4 stk |
| Maksimal vægtkapacitet: | 12 kg |
| Skruer inkluderet: | Ja |
| Antal skruer: | 10 |
| Tastaturbakke: | Ja |
| Tastaturbakke (BxD): | 700 x 310 mm |
| Maksimal vægt pr. tastaturbakke: | 12 kg |