Sony
Underholdning til i bilen og på vandet
CDX-L400X
Sony CDX-L400X Brugsanvisning
Her er Sony CDX-L400X (Underholdning til i bilen og på vandet) brugervejledning. 112 sider på sprog Nederlands med en vægt på 1.1 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/112
MiJia Smart Kettle Overview
XIAOMI-MI.COM
Smart connection
Lid
Inner part
Body
Base
Open lid
button
Handle
Boiling indicator
Boil/Hold a
temperature
button
Power plug
The inside of the pot and lid are made from 304
stainless steel, allowed for contact with food: austenitic
stainless steel, 06Cr19Ni10
1. Turn on Bluetooth on your phone;
2. In Mi Store get «Mi Smart Home» app or scan the QR-
code to download a client application;
3. Make sure that electric Mi Smart Kettle is on. Open the
app and connect the devices to each other, guided by the
instructions of the client interface.
Using
1. Click on button to open a lid of
the kettle, add water.
The water level must not
exceed the maximum mark,
and should not be below the
minimum.
2. Close a lid, put the kettle on a base.
If there is a normal contact between the
kettle and base, the LED blinks once,
and then turn o.
3. Click on the «Boil» or «Keep
temperature» button, select the
heating mode.
Keep temperature mode setup
instructions, see on the next
page.
4. When water boils, «Boil» indicator turns o,
then water heating will stop and sound a specic
signal; when «Keep temperature» mode is on, water
temperature reaches the level, you set before, and
the kettle sounds a specic signal. Orange indicator of
«Keep temperature» mode lights up and turns on.
XIAOMI-MI.COM
Problemløsning Sony CDX-L400X
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Mærke: | Sony |
| Kategori: | Underholdning til i bilen og på vandet |
| Model: | CDX-L400X |