Ozito SPIK-2510 Brugsanvisning
Her er Ozito SPIK-2510 (Pumpe) brugervejledning. 1 sider på sprog Engelsk med en vægt på 0.2 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/1
SETUP
SUBMERSIBLE PUMP
INSTALLATION KIT
Ø25mm
SET-UP GUIDE
CONTENTS
Ensure your pump is disconnected from the power supply before
performing any of the following operations.
1. Fit the stainless steel hose
clamp over the lay at hose.
2. Securely attach the lay at
hose to the pumps universal
adaptor (not supplied), and
tighten.
3. The nylon lowering rope
can be secured to the pump
handle if required when
submersing the pump in
water.
4. Refer to the instruction manual supplied with your submersible pump
for full details on warnings, safety, operation, installation and proper
use of your pump.
SPIK-2510
1. 20m Nylon Lowering Rope
2. Ø25mm x 10m Lay Flat Hose
3. Ø25mm Stainless Hose clamp
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 2 3
Problemløsning Ozito SPIK-2510
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
Mærke: | Ozito |
Kategori: | Pumpe |
Model: | SPIK-2510 |