Chief
Tilbehør til projektor
SLM510
Chief SLM510 Brugsanvisning
Her er Chief SLM510 (Tilbehør til projektor) brugervejledning. 1 sider på sprog Engelsk med en vægt på 0.1 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.
Side 1/1
8802-000079 04/11/03
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com
I
NSTALLATION
I
NSTRUCTIONS
SLB-510 H
ANGER
B
RACKET
for Toshiba TLP-510
Prior to assembly, unpack carton and verify contents.
For security installation, use security hardware package inside the ALL-POINTS™
Security Kit. Follow the instructions below for attaching the bracket to the projector
using either standard hardware or security hardware.
If you are missing any of the following components, please contact Customer Service at
1-800-582-6480
Obsolete Bracket
(1) SLB-510 Plate (2) M4 x 8mm Machine Screws
(2) 10-24 Nylock Nuts (2) #10 Flatwashers
(4) Felt Squares (2) M4 Flatwashers
(1) U-Form Rods (6) Thumb Nuts
I
NSTALLATION
I
NSTRUCTIONS
1. Turn projector upside down. Attach bracket to projector using the two (2) M4 machine screws
and washers. When attaching bracket to the mount, be careful not to overtighten the screws.
2. Attach the U-Form rod around the projector and up through the holes in the plate, secure using the
two (2) 10-24 nylock nut and two (2) #10 flatwashers. NOTE: Felt squares are provided to
protect projector shell, if desired. They can be attached to the projector or wrapped around
the U-Form rod.
3. See RPA/Smart-Lift™ Instructions.
Problemløsning Chief SLM510
Hvis du har læst manualen omhyggeligt, men ikke fundet en løsning på dit problem, bed andre brugere om hjælp
Specifikationer
| Mærke: | Chief |
| Kategori: | Tilbehør til projektor |
| Model: | SLM510 |