Asus overvåge VW192

Asus VW192 Brugsanvisning

Her er Asus VW192 (overvåge) brugervejledning. 18 sider på sprog Engels med en vægt på 1.2 Mb. Hvis du ikke kan finde svar på dit problem Spørg vores community.

Side 1/18

VW192 Series

LCD Monitor

User Guide

E2682 V1 E2682 V1

E2682 V1

July 2006 July 2006

July 2006 July 2006 July 2006

i ii ii ii ii i

C o p y r i g h t © 2 0 0 6 A S U S T e K C O M P U T E R I N C . A l l R i g h t s R e s e r v e d .C o p y r i g h t © 2 0 0 6 A S U S T e K C O M P U T E R I N C . A l l R i g h t s R e s e r v e d .Co p y r i g h t © 2 0 0 6 A S U S T e K C O M P U T E R I N C . A l l R i g h t s R e s e r v e d .C o p y r i g h t © 2 0 0 6 A S U S T e K C O M P U T E R I N C . A l l R i g h t s R e s e r v e d .Co p y r i g h t © 2 0 0 6 A S U S T e K C O M P U T E R I N C . A l l R i g h t s R e s e r v e d .

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form

or by any means, except documentation kept by the purchaser for backup purposes, without the

express written permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modified or

altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the

serial number of the product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS

OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR

ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND

SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY

OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL,

INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered

trademarks or copyrights of their respective companies, and are used only for identification or

explanation and to the owners’ benefit, without intent to infringe.

Table of contents

Notices ................................................................................................ iii

Safety information .............................................................................. iv

Care & Cleaning .................................................................................... v

Chapter 1:Chapter 1:

Chapter 1:Chapter 1:Chapter 1: Product introductionProduct introduction

Product introductionProduct introductionProduct introduction

1.1 Welcome! .............................................................................. 1-1

1.2 Package contents ................................................................. 1-1

1.3 Assembling the monitor base ............................................... 1-2

1.4 Monitor introduction ............................................................. 1-3

1.4.1 Front of the LCD monitor ....................................... 1-3

1.4.2 Rear of the LCD monitor ......................................... 1-4

Chapter 2:Chapter 2:

Chapter 2:Chapter 2:Chapter 2: SetupSetup

SetupSetupSetup

2.1 Adjusting the monitor .......................................................... 2-1

2.2 Detaching the arm/stand (for VESA wall mount) ................ 2-2

Chapter 3:Chapter 3:

Chapter 3:Chapter 3:Chapter 3: General InstructionGeneral Instruction

General InstructionGeneral InstructionGeneral Instruction

3.1 OSD (On-Screen Display) menu ............................................ 3-1

3.1.1 How to reconfigure ................................................. 3-1

3.1.2 OSD Function Introduction ..................................... 3-1

3.2 Troubleshooting (FAQ) ......................................................... 3-4

3.3 Supported operating modes ................................................. 3-5

iiiiiiiiiiiiiii

Notices

Federal Communications Commission StatementFederal Communications Commission Statement

Federal Communications Commission StatementFederal Communications Commission StatementFederal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

• This device may not cause harmful interference, and

• This device must accept any interference received including interference

that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with

manufacturer’s instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications StatementCanadian Department of Communications StatementCanadian Department of Communications StatementCanadian Department of Communications StatementCanadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise

emissions from digital apparatus set out in the Radio Interference

Regulations of the Canadian Department of Communications.

This clas s B digital appa ratus complie s with Canadia nThis clas s B digital appa ratus complie s with Canadia n

This clas s B digital appa ratus complie s with Canadia n

ICE S-0 0 3 .ICE S-0 0 3 .

ICE S-0 0 3 .ICE S-0 0 3 .ICE S-0 0 3 .

As an Ene rgy StarAs an Ene rgy Star

As an Ene rgy Star

® ® ® ® ®

Partner, our company has de termined thatPartner, our company has de termined that

Partner, our company has de termined that

this product me ets the Energy Starthis product me ets the Energy Star

this product me ets the Energy Star

® ®

guid eli nes f or energyguid eli nes f or energy

guid eli nes f or energy

ef f ic ien c y.ef f ic ien c y.

ef f ic ien c y.

i vi vi vi vi v

Safety information

• Before setting up the monitor, carefully read all the documentation that

came with the package.

• To prevent fire or shock hazard, never expose the monitor to rain or

moisture.

• Never try to open the monitor cabinet. The dangerous high voltages

inside the monitor may result in serious physical injury.

• If the power supply is broken, do not try to fix it by yourself. Contact a

qualified service technician or your retailer.

• Before using the product, make sure all cables are correctly connected

and the power cables are not damaged. If you detect any damage,

contact your dealer immediately.

• Slots and openings on the back or top of the cabinet are provided for

ventilation. Do not block these slots. Never place this product near or

over a radiator or heat source unless proper ventilation is provided.

• The monitor should be operated only from the type of power source

indicated on the label. If you are not sure of the type of power supply to

your home, consult your dealer or local power company.

• Use the appropriate power plug which complies with your local power

standard.

• Do not overload power strips and extention cords. Overloading can result

in fire or electric shock.

• Avoid dust, humidity, and temperature extremes. Do not place the

monitor in any area where it may become wet. Place the monitor on a

stable surface.

• Unplug the unit during a lightning storm or if it will not be used for a long

period of time. This will protect the monitor from damage due to power

surges.

• Never push objects or spill liquid of any kind into the slots on the monitor

cabinet.

• To ensure satisfactory operation, use the monitor only with UL listed

computers which have appropriate configured receptacles marked

between 100-240V AC.

• If you encounter technical problems with the monitor, contact a qualified

service technician or your retailer.

vvvvv

Care & Cleaning

• Before you lift or reposition your monitor, it is better to disconnect the

cables and power cord. Follow the correct lifting techniques when

positioning the monitor. When lifting or carrying the monitor, grasp the

edges of the monitor. Do not lift the display by the stand or the cord.

• Cleaning. Turn your monitor off and unplug the power cord. Clean the

monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may

be removed with a cloth dampened with mild cleaner.

• Avoid using a cleaner containing alcohol or acetone. Use a cleaner

intended for use with the LCD. Never spray cleaner directly on the

screen, as it may drip inside the monitor and cause an electric shock.

The following symptoms are normal with the monitor:The following symptoms are normal with the monitor:

The following symptoms are normal with the monitor:The following symptoms are normal with the monitor:The following symptoms are normal with the monitor:

• The screen may flicker during the initial use due to the nature of the

fluorescent light. Turn off the Power Switch and turn it on again to make

sure that the flicker disappears.

• You may find slightly uneven brightness on the screen depending on the

desktop pattern you use.

• When the same image is displayed for hours, an afterimage of the

previous screen may remain after switching the image. The screen will

recover slowly or you can turn off the Power Switch for hours.

• When the screen becomes black or flashes, or cannot work anymore,

contact your dealer or service center to fix it. Do not repair the screen

by yourself!

Conventions used in this guideConventions used in this guideConventions used in this guideConventions used in this guideConventions used in this guide

WA R NIN G: WA R NIN G: WA RN IN G: W A R NIN G: WA RN IN G: Information to prevent injury to yourself when trying to

complete a task.

CA UT IO N : CA UT IO N : CA UT IO N : CA UT IO N : CA UT IO N : Information to prevent damage to the components

when trying to complete a task.

IMPO R TA NT: IMPO R TA NT:

IMPO R TA NT: Information that you MUST follow to complete a

task.

N O T E : N O T E :

N O T E : Tips and additional information to aid in completing a task.

v iv iv iv iv i

Where to find more informationWhere to find more information

Where to find more informationWhere to find more informationWhere to find more information

Refer to the following sources for additional information and for product

and software updates.

1 .1 .1 .1 .1 . ASUS w e bs i tesASUS w e bs i tesASUS w e bs i tesASUS w e bs i tesASUS w e bs i tes

The ASUS websites worldwide provide updated information on ASUS

hardware and software products. Refer to http://www.asus.com

2 .2 .

2 . Optiona l d o c umentationOptiona l d o c umentation

Optiona l d o c umentationOptiona l d o c umentation

Optiona l d o c umentation

Your product package may include optional documentation, such as

warranty card, that may have been added by your dealer. These

documents are not part of the standard package.

1 - 11 - 11 - 11 - 11 - 1A S U S L C D M o n i t o r V W1 9 2 S e r i e sA S U S L C D M o n i t o r V W1 9 2 S e r i e sA S U S L C D M o n i t o r V W1 9 2 S e r i e sA S U S L C D M o n i t o r V W1 9 2 S e r i e sA S U S L C D M o n i t o r V W1 9 2 S e r i e s

1.1 Welcome!

Thank you for purchasing the ASUS

VW192 Series LCD monitor!

The latest widescreen LCD monitor from ASUS provides a crisper, broader,

and brighter display, plus a host of features that enhance your viewing

experience.

With these features, you can enjoy the convenience and delightful visual

experience that the VW192 Series brings you!

1.2 Package contents

Check your VW192 Series LCD package for the following items:

LCD monitor

User manual

1 x Power cord

1 x VGA cable

1 x DVI cable (Only for VW192T)

1 x Audio cable (Only for VW192T and VW192S)

1 x Rear cover

If any of the above items is damaged or missing, contact your retailer

immediately.

1 - 21 - 21 - 21 - 21 - 2 C h a p t e r 1 : P r o d u c t i n t r o d u c t i o nC h a p t e r 1 : P r o d u c t i n t r o d u c t i o nC h a p t e r 1 : P r o d u c t i n t r o d u c t i o nC h a p t e r 1 : P r o d u c t i n t r o d u c t i o nC h a p t e r 1 : P r o d u c t i n t r o d u c t i o n

1.3 Assembling the monitor base

To assemble the monitor base:

1. Connect the base with the monitor. A click shows that the base has

been connected successfully.

2. Tighten the screw as the drawing shows to fix the base.

3. Adjust the monitor to the angle that is most comfortable for you.

• We recommend that you cover the table surface with soft cloth to

prevent damage to the monitor.

333332222211111

s c r e ws c r e w

s c r e w

1 - 31 - 31 - 31 - 31 - 3A S U S L C D M o n i t o r V W1 9 2 S e r i e sA S U S L C D M o n i t o r V W1 9 2 S e r i e sA S U S L C D M o n i t o r V W1 9 2 S e r i e sA S U S L C D M o n i t o r V W1 9 2 S e r i e sA S U S L C D M o n i t o r V W1 9 2 S e r i e s

1.4 Monitor introduction

1.4.11.4.1

1.4.1 Front of the LCD monitorFront of the LCD monitor

Front of the LCD monitorFront of the LCD monitor

Front of the LCD monitor

1. SP L EN DI DSP L EN DID

SP L EN DIDS P LEN DIDSP L EN DID B u t to n :B u t to n :

B u t to n :B u t to n :B u t to n :

• Use this hotkey to switch from five video preset modes (Game

Mode, Night View Mode, Scenery Mode, Standard Mode, Theater

Mode) with SPLENDID™ Video Enhancement Technology.

• Exit the OSD menu or go back to the previous menu as the OSD

menu is active.

• Automatically adjust the image to its optimized position, clock,

and phase by pressing this button for 2-4 seconds.

Base

44444 55555 66666

2. Bu t to n :B u tt o n :B u t t o n :B u t to n :B u tt o n :

• Press this button to decrease the value of the function selected

or move to the previous fuction.

• This is also a hotkey for Volume adjustment.

3. ME NU Bu tton :MENU Bu tton :

MENU Bu tton :MENU B utto n:

MENU Bu tton :

• Press this button to enter/select the icon (function) highlighted

while the OSD menu is activated.

4. B u t to n :B u t to n :

B u t to n :B u t to n :B u t to n :

• Press this button to increase the value of the function selected

or move to the next fuction.

• This is also a hotkey for Brightness adjustment.

11111 22222 33333

1 - 41 - 41 - 41 - 41 - 4 C h a p t e r 1 : P r o d u c t i n t r o d u c t i o nC h a p t e r 1 : P r o d u c t i n t r o d u c t i o nC h a p t e r 1 : P r o d u c t i n t r o d u c t i o nC h a p t e r 1 : P r o d u c t i n t r o d u c t i o nC h a p t e r 1 : P r o d u c t i n t r o d u c t i o n

1.4.21.4.2

1.4.2 Rear of the LCD monitorRear of the LCD monitor

Rear of the LCD monitorRear of the LCD monitor

Rear of the LCD monitor

1. P W R p ort . PW R p ort. PW R p o rt. PW R p o rt. PWR po rt. This port connects the power connector from the

bundled power cord.

2. DVI p o rt.DVI po rt .

DVI po rt .DV I p or t.

DVI po rt . This 24-pin port is for PC (Personal Computer) DVI-D

digital signal connection. (Only for some models)

3. V GA po rt. VGA p or t.

VGA p ort. VGA p ort.

VGA p ort. This 15-pin port is for PC VGA connection.

4. A udi o-in p ort Aud io-in p ort

Aud io-in p ort Aud io-i n port

Aud io-in p ort . .

. .

. This port connects PC audio source by the

bundled audio cable. (Only for some models)

Rear

connectors

Rear connectors (from left to right)Rear connectors (from left to right)

Rear connectors (from left to right)

5. P ower b utto n P ower b utto n

P ower b utto n P ower b utto n

P ower b utto n

• Press this button to turn the monitor on/off.

6. Pow er indic a torPowe r ind ic ator

Powe r ind ic atorPowe r ind ic atorPowe r ind ic ator

• The color definition of the power indicator is as the below table.

S t a t u s D e s c r i p t i o n S t a t u s D e s c r i p t i o n S t a t u s D e s c r i p t i o n S t a t u s D e s c r i p t i o n S t a t u s D e s c r i p t i o n

Blue ON

Amber Standby mode

OFF OFF

2 - 12 - 12 - 12 - 12 - 1A S U S L C D M o n i t o r V W1 9 2 S e r i e sA S U S L C D M o n i t o r V W1 9 2 S e r i e sA S U S L C D M o n i t o r V W1 9 2 S e r i e sA S U S L C D M o n i t o r V W1 9 2 S e r i e sA S U S L C D M o n i t o r V W1 9 2 S e r i e s

2.1 Adjusting the monitor

• For optimal viewing, we recommend that you look at the full face of the

monitor, then adjust the monitor to the angle that is most comfortable

for you.

• Hold the stand to prevent the monitor from falling when you change its

angle.

• You can adjust the monitor’s angle from -5º to 20º.

-5º~20º

2 - 22 - 22 - 22 - 22 - 2 C h a p t e r 2 : S e t u pC h a p t e r 2 : S e t u pC h a p t e r 2 : S e t u pC h a p t e r 2 : S e t u pC h a p t e r 2 : S e t u p

2.2 Detaching the arm/stand

(for VESA wall mount)

The detachable stand of the VW192 Series LCD monitor is specially

designed for VESA wall mount.

To detach the arm/stand:

1. Remove the rear cover.

2. Have the front of the monitor face down on a table.

3. Use a screwdriver to remove the two screws on the stand of the

monitor as the below drawing shows.

4. Two other screws show after you remove the screws on the stand.

Repeat step 3.

• We recommend that you cover the table surface with soft cloth to

prevent damage to the monitor.

• Hold the stand of the monitor when you remove the screws.

The VESA wall mount kit (100 mm x 100 mm) is purchased separately.

s c r e w ss c r e w ss c r e w ss c r e w ss c r e w s

R e a rR e a r

R e a r

c o v e rc o v e r

c o v e r

3 - 13 - 13 - 13 - 13 - 1A S U S L C D M o n i t o r V W 1 9 2 S e r i e sA S U S L C D M o n i t o r V W 1 9 2 S e r i e sA S U S L C D M o n i t o r V W 1 9 2 S e r i e sA S U S L C D M o n i t o r V W 1 9 2 S e r i e sA S U S L C D M o n i t o r V W 1 9 2 S e r i e s

3.1 OSD (On-Screen Display) menu

3.1.13.1.1

3.1.1 How to reconfigureHow to reconfigure

How to reconfigureHow to reconfigure

How to reconfigure

1. Press the MENU button to activate

the OSD menu.

2. Press and to navigate through the functions. Highlight and

activate the desired function by pressing the MENU button. If the

function selected has a sub-menu, press + and - again to navigate

through the sub-menu functions. Highlight and activate the desired

sub-menu function by pressing the MENU button.

3. Press and to change the settings of the selected function.

4. To exit the OSD menu, press the SPLENDID button. Repeat step 2 and

step 3 to adjust any other function.

3.1.23.1.2

3.1.23.1.23.1.2 OSD Function IntroductionOSD Function Introduction

OSD Function IntroductionOSD Function IntroductionOSD Function Introduction

1. S p e n d i dS p e n d i d

S p e n d i dS p e n d i dS p e n d i d

This function contains five

sub-functions you can select

for your preference.

• Scenery Mode:Scenery Mode:

Scenery Mode:Scenery Mode:

Scenery Mode: advance for scenery use with SPLENDID™ Video

Enhancement.

• Standard Mode:Standard Mode:

Standard Mode:Standard Mode:

Standard Mode: advance for general Window use with

SPLENDID™ Video Enhancement.

•Theater Mode:Theater Mode:

Theater Mode:Theater Mode:Theater Mode: advance for movie use with SPLENDID™ Video

Enhancement.

•Game Mode: Game Mode:

Game Mode: Game Mode: Game Mode: advance for game use with SPLENDID™ Video

Enhancement.

• Night View ModeNight View ModeNight View ModeNight View ModeNight View Mode: advance for dark-display use with SPLENDID™

Video Enhancement.

3 - 23 - 23 - 23 - 23 - 2 C h a p t e r 3 : G e n e r a l I n s t r u c t i o nC h a p t e r 3 : G e n e r a l I n s t r u c t i o nC h a p t e r 3 : G e n e r a l I n s t r u c t i o nC h a p t e r 3 : G e n e r a l I n s t r u c t i o nC h a p t e r 3 : G e n e r a l I n s t r u c t i o n

2. I m a g eI m a g e

I m a g eI m a g e

I m a g e

You can adjust brightness, contrast,

sharpness, saturation,position (VGA

only), and focus (VGA only) from

this main function.

•Brightness: Brightness:

Brightness: Brightness: Brightness: the adjusting range is from 0 to 100. is a

hotkey to activate this function.

•Contrast: Contrast:

Contrast: Contrast: Contrast: the adjusting range is from 0 to 100.

• Sharpness: Sharpness: Sharpness: Sharpness: Sharpness: the adjusting range is from 0 to 100.

•Saturation: Saturation:

Saturation: Saturation: Saturation: the adjusting range is from 0 to 100.

• Position:Position:Position:Position:Position: adjusts the horizontal postition (H-Position) and the

vertical position (V-Position) of the image. The adjusting range is

from 0 to 100.

• Foc us: Foc us:

Foc us: Foc us:

Foc us: reduces Horizonal-line noise and Vertical-line noise of the

image by adjusting (Phase) and (Clock) separately. The adjusting

range is from 0 to 100.

• Phase adjusts the phase of the pixel clock signal. With a wrong

phase adjustment, the screen shows horizontal disturbances.

• Clock (pixel frequency) controls the number of pixels scanned by

one horizontal sweep. If the frequency is not correct, the screen

shows vertical stripes and the image is not proportional.

3. C o l o rC o l o rC o l o rC o l o rC o l o r

Select the image color you like

from this function.

• Color Temp.:Color Temp.:

Color Temp.:Color Temp.:

Color Temp.: contains five color modes including Cool, Normal,

Warm, sRGB, and User mode.

• Skin Tone:Skin Tone:

Skin Tone:Skin Tone:

Skin Tone: contains three color modes including Reddish, Natural,

and Yellowish.

In the User mode, colors of R (Red), G (Green), and B (Bluee) are user-

configurable; the adjusting range is from 0-100.

3 - 43 - 43 - 43 - 43 - 4 C h a p t e r 3 : G e n e r a l I n s t r u c t i o nC h a p t e r 3 : G e n e r a l I n s t r u c t i o nC h a p t e r 3 : G e n e r a l I n s t r u c t i o nC h a p t e r 3 : G e n e r a l I n s t r u c t i o nC h a p t e r 3 : G e n e r a l I n s t r u c t i o n

3.2 Troubleshooting (FAQ)

P r o b l e m P r o b l e m P r o b l e m P r o b l e m P r o b l e m

Power LED is not ON

The Power LED lights

amber and there is

no screen image

Screen image is too

light or dark

Screen image is not

centered or sized

properly

Screen image

bounces or a wave

pattern is present in

the image

Screen image has

color defects (white

does not look white)

Screen image is

blurry or fuzzy

No sound or sound is

low

P o s s i b l e S o l u t i o nP o s s i b l e S o l u t i o nP o s s i b l e S o l u t i o nP o s s i b l e S o l u t i o nP o s s i b l e S o l u t i o n

• Press the button to check if the monitor is in the ON

mode.

• Check if the power cord is properly connected to the

monitor and the power outlet.

• Check if the monitor and the computer are in the ON mode.

• Make sure the signal cable is properly connected the

monitor and the computer.

• Inspect the signal cable and make sure none of the pins are

bent.

• Connect the computer with another available monitor to

check if the computer is properly working.

• Adjust the Contrast and Brightness settings via OSD.

• Press the SPLENDID button for two seconds to

automatically adjust the image.

• Adjust the H-Position or V-Position settings via OSD.

• Make sure the signal cable is properly connected to the

monitor and the computer.

• Move electrical devices that may cause electrical

interference.

• Inspect the signal cable and make sure that none of the

pins are bent.

• Perform Reset via OSD.

• Adjust the R/G/B color settings or select the Color

Temperature via OSD.

• Press the SPLENDID button for two seconds to

automatically adjust the image.

• Adjust the Phase and Clock settings via OSD.

• Ensure that the audio cable is properly connected to the

monitor and the computer

• Adjust the volume settings of both your monitor and

computer.

• Ensure that the computer sound card driver is properly

installed and activated.

3 - 53 - 53 - 53 - 53 - 5A S U S L C D M o n i t o r V W 1 9 2 S e r i e sA S U S L C D M o n i t o r V W 1 9 2 S e r i e sA S U S L C D M o n i t o r V W 1 9 2 S e r i e sA S U S L C D M o n i t o r V W 1 9 2 S e r i e sA S U S L C D M o n i t o r V W 1 9 2 S e r i e s

3.3 Supported operating modes

S t a n d a r d R e s o l u t i o n H o r i z o n t a l V e r t i c a l P i x e lS t a n d a r d R e s o l u t i o n H o r i z o n t a l V e r t i c a l P i x e l

S t a n d a r d R e s o l u t i o n H o r i z o n t a l V e r t i c a l P i x e l

F r e q u e n c y F r e q u e n c y F r e q u e n c y F r e q u e n c y F r e q u e n c y F r e q u e n c y

F r e q u e n c y F r e q u e n c y F r e q u e n c y

720 x 400 31.47KHz 70Hz 28.32MHz

640 x 480 31.47KHz 60Hz 25.18MHz

640 x 480 37.90KHz 72Hz 31.50MHz

640 x 480 37.50KHz 75Hz 31.50MHz

800 x 600 35.16KHz 56Hz 36.00MHz

800 x 600 37.90KHz 60Hz 40.00MHz

800 x 600 48.10KHz 72Hz 50.00MHz

800 x 600 46.90KHz 75Hz 49.50MHz

1024 x 768 48.40KHz 60Hz 65.00MHz

1024 x 768 56.50KHz 70Hz 75.00MHz

1024 x 768 60.02KHz 75Hz 78.75MHz

1280 x 1024 64.00KHz 60Hz 108.00MHz

1280 x 1024 80.00KHz 75Hz 135.00MHz

1152 x 864 67.50KHz 75Hz 108.00MHz

1440 x 900 55.94KHz 60Hz 106.00MHz

DOS

VGA

SVGA

XGA

SXGA

VESA

(Primary)

* Modes not listed in the table may not be supported. For optimal

resolution, we recommend that you choose a mode listed in the table

above.

3 - 63 - 63 - 63 - 63 - 6 C h a p t e r 3 : G e n e r a l I n s t r u c t i o nC h a p t e r 3 : G e n e r a l I n s t r u c t i o nC h a p t e r 3 : G e n e r a l I n s t r u c t i o nC h a p t e r 3 : G e n e r a l I n s t r u c t i o nC h a p t e r 3 : G e n e r a l I n s t r u c t i o n